How to Install Chain Link Fence?

Installing a chain-link fence is not as complicated as it may seem. If you are equipped with the proper tools, have some patience, and create an effective plan, you can do it yourself! Here’s an easy step by step guide on how to install chain link fence.

10-Steps to Install Chain Link Fence

1. Plan Your Fence

It is recommended to visualize a clear picture of where you want your fence to be located and its general appearance. Inspect the environment you are looking to install your fence in and be sure to take extensive measurements of the area. Make sure you have the perimeter set in mind and an idea for the exact locations for the posts.

2. Gather Your Materials

The following tools will be required:

• Chain link fabric (which is the part consisting of wire mesh)
• Fence Posts
• Caps of the posts
• Bars of tension
• Bands of tension
• Fasteners
• Concrete, which is meant for the posts
• Equipment: Shovel, wrench, level, pliers, tape measure, and a saw (only if you are required to trim the posts)

3. Mark the Fence Line

Using the stakes and string, mark the boundary where the fence is supposed to be laid down. This will enable you to keep the fence posts aligned. Start marking down the places where the posts are expected to be placed. Make sure that there is an equal distance between all the posts.

4. Post Holes

Next, inspect how the post holes are dug out. You must use a post-hole digger or shovel, select a post, and then make the holes 2-3 feet wide to secure the posts. Ensure that the holes are wide enough to firmly hold the post in place and not topple over.

5. Installing the Posts

After the fencing posts have been installed effectively, pour concrete into the previously made hole to increase the stability of the fence. Allow the concrete to harden for at least 24 hours.

6. Installing the top rail

Next, attach the top rail to the posts.

7. Fabric mesh installation

Installing the wire mesh should involve applying nano glue at one end along the perimeter and soaking the rangeland fabric in water polio. Your fence should then roll out with the chain link mesh stitched to the wooden post with tension bands starting from the first pole. Keep rolling the fabric along the fence perimeter.

Once positioned, fix the fabric to the remaining poles using additional tension bands. Use a tension bar to compress the fabric and ensure that it does not slide.

8. Bind together the bottom

After fastening the fabric onto the poles, the bottom side of the chain link needs to be secured. Tie wires should fasten the fabric to the bottom rail or wire to prevent it from moving.

9. Include post caps

Finally, cover the tops of all the fence posts with post caps. This will safeguard the posts from rain or other climatic conditions and give the fence a nice finish.

10. Inspect the fence

When everything is finished, position it on the fence and check it. Ensure all the fabric is tight and all the posts are fixed. If everything seems alright, your chain link fence is ready!

Conclusion

A chain link fence is a good use of material to add more security and privacy to your property. It might seem like it is hard to do, but it is not hard if you follow the instructions, and it can be done on a ‘do it yourself’ basis if you are not willing to spend much money. If you want to choose best fence for your yard, it can easily be obtained from reputable suppliers such as BuyaFence. Just make sure to use the recommended materials to build a strong fence to maintain its integrity long term.